Civemasa Implementos Agrícolas
27
CRO 4.0
Optional
Furrower assembly
The furrower leaves the factory pre-assembled;
Its utilization consists on opening a furrow to deposit products (Lime, plaster, etc), with
the intention to perform an uniform incorporation of these products during the composting
process.
To assemble the furrower, the operator just need to fasten it to the rear part of the
frame, as shown on the illustration below.
Couple the arm support of the row marker (A) to the frame (B) using a bolt (C), spring
washer and nut.
Lock the shock absorber (D) to the frame using a spring washer and bolt.
NOTE When transporting the CRO, always use the transport lock (E) to assure that
there will not be any damage to the equipment.
C
C
E
E
A
A
B
B
D
D
