4. Press
the
Æ
key to access the
Remote Number
parameter. Set to either 1 or 2. This will differentiate
the 2 remotes to the PBXgateway in the 2 to 1 configuration.
Figure 16: Remote #1
Figure 17: Remote #2
IMPORTANT NOTE
: The Remote Unit connected to WAN 1 of the Gateway
MUST
be Remote [1].
5. Press
the
Å
and
È
key to the
Save
option. Press
Enter
to save changes to the active config (.
rem
).
EXTender™ IP6000 Quick Installation Guide
38
