8. Double click the
Start Managing the Device
link.
9. The Main menu will appear.
Power LED WAN LEDs Port LEDs
LED States:
PWR:
Solid Green
WAN1:
Solid Green (Ready) if a synchronous device is connected to WAN
1.
Solid Orange (Ready) if an asynchronous ISDN TA is connected
and accepting commands (but there is no link up- in Call Suspend
mode or have not dialed it yet).
Port LEDs
: Solid Green if connected properly to PBX.
Figure 14: HTML View
10. The Management Interface is now accessible for complete EXTender configuration.
11. Clicking on the
LED Definitions
in the upper right corner will give you a graphical representation of
the LED states and their definitions.
EXTender™ IP6000 Quick Installation Guide
33