Table 7: Basic Configuration, continued
You must….
To….
Default
Setting
Set the Async
parameters for the
selected WAN port
Match the settings for the device being used.
DCE Type:
Select the ISDN TA being used. (See page 12
for
a list of recommended devices.)
-
Async Rate:
Set the asynchronous data transfer speed of the
WAN port, it MUST match the TA speed setting.
115200
ISDN Switch Type:
Select the type of Central Office (CO)
switch being used for the ISDN connection.
National_ISDN
Phone Numbers:
Your System Administrator provides this
information.
•
Local Dialing Num1:
Enter the DN 1 number assigned to the
ISDN line, which was provided when the ISDN line was installed.
Example:
2881918
•
ISDN SPID 1:
Enter SPID 1 assigned to the first ISDN B-
channel.
Example:
40328819180101
•
Local Dialing Num2:
Enter the DN 2 number assigned to the
ISDN line.
•
ISDN SPID 2:
Enter SPID 2 assigned to the second ISDN B-
channel.
•
Dial Prefix:
Enter the required prefix for dialing out on this WAN
port.
Example:
98
•
Dialback Num1:
Enter the telephone number for dialing the first
ISDN B-channel of the EXTender from the PBX location where
the Gateway is installed.
Example:
914032881918
•
Dialback Num2:
Enter the telephone number for dialing the
second ISDN B-channel of the EXTender from the PBX location
where the Gateway is installed.
EXTender™ IP6000 Quick Installation Guide
26