Optional Configuration
The EXTender MI has optional configuration parameters providing the following capabilities: Refer to the
System Administrator’s Guide for more information on configuring these options.
Auto-Connect
– This is a Remote module option, which automatically connects remote users
(telephones) when the EXTender is re-booted or brought on-line. (This eliminates the need to press “1”
on the Remote telephone.) Enable this feature for non-display telephones since you cannot see the
“Press ‘1’ to Connect” message.
Admin Password –
If configured, this option restricts access to the EXTender MI, by requiring a pass-
word for entry. You must enter the
Admin Password
before you change any configuration parameters.
Note: The Gateway and EXTender units have their own separate Admin Passwords.
Connect Password –
This option provides a secure WAN link between the Gateway and EXTender. If
configured, a
Connect Password
is required for each telephone to connect to the Gateway.
User ID -
If configured, this option assigns an ID that maps the Remote Unit to the correct port on the
PBX. The remote user must enter this ID to connect to the Gateway.
Active Call Monitoring (Norstar Only) –
If enabled, this allows a user, such as an Office Administrator,
to monitor users that are on Active Calls as to not disturb them and direct the call to their voice mail.
EXTender™ IP6000 Quick Installation Guide
36
