HTML Interface
The EXTender can be configured using a standard web server over an existing LAN connection. This
feature provides the System Administrator complete management capabilities as well as status
information for both WAN and PORT connections.
IMPORTANT
:
•
All IP parameters for the EXTender must be configured before the web server session can be
established.
•
The EXTender must be connected to the LAN via the
LAN
port.
•
The EXTender must be powered up and online.
Procedure
1. Access the Management Interface (MI) using a Telnet session or via the Console Port.
2. Access the Web Server parameter using the following path:
Configuration->IP->Web Server
3. Select
YES
for Enabled. Set the Timeout to
30
.
4. Save the settings and Log out of the MI.
5. Open a web browser from your PC.
Note
: Only Windows Internet Explorer (version 5.X or higher) is
supported.
6. At the http:// prompt type in the IP Address of the EXTender as shown below.
7. The HTML pop-up window will appear. Read the instructions!
EXTender™ IP6000 Quick Installation Guide
32
