Cisco WRT54G User Manual Download

Page: 92 / 100

Appendix F: Glossary

Wireless-G Broadband Router

Ping

(

acket

ternet

roper) - An Internet utility used to determine whether a particular IP address is online.

POP3

(

ost

ffice

rotocol

) - A standard mail server commonly used on the Internet.

Port

- The connection point on a computer or networking device used for plugging in cables or adapters.

ower

ver

thernet (

PoE

) - A technology enabling an Ethernet network cable to deliver both data and power.

PPPoE

(

oint to

oint

rotocol

ver

thernet) - A type of broadband connection that provides authentication

(username and password) in addition to data transport.

PPTP

(

oint-to-

oint

unneling

rotocol) - A VPN protocol that allows the Point to Point Protocol (PPP) to be

tunneled through an IP network. This protocol is also used as a type of broadband connection in Europe.

Preamble

- Part of the wireless signal that synchronizes network traffic.

RADIUS

(

emote

uthentication

ial-

ser

ervice) - A protocol that uses an authentication server to control

network access.

RJ-45

(

egistered

ack

-45

) - An Ethernet connector that holds up to eight wires.

Roaming

- The ability to take a wireless device from one access point's range to another without losing the

connection.

Router

- A networking device that connects multiple networks together.

RTS

(

equest

end) - A networking method of coordinating large packets through the RTS Threshold setting.

Server

- Any computer whose function in a network is to provide user access to files, printing, communications,

and other services.

SMTP

(

imple

ail

ransfer

rotocol) - The standard e-mail protocol on the Internet.

SNMP

(

imple

etwork

anagement

rotocol) - A widely used network monitoring and control protocol.

Software

- Instructions for the computer. A series of instructions that performs a particular task is called a

“program”.

SOHO

(

mall

ffice/

ome

ffice) - Market segment of professionals who work at home or in small offices.

SPI

(

tateful

acket

nspection)

Firewall

- A technology that inspects incoming packets of information before

allowing them to enter the network.

Summary of Contents for WRT54G





































































































Search results

Summary of Contents for WRT54G

Reviews:

Related manuals for WRT54G

Brands by name

Popular brands

Cisco WRT54G, User Manual

Search results

Summary of Contents for WRT54G

Reviews:

Related manuals for WRT54G

Brands by name

Popular brands