Cisco WRT54G User Manual Download | Manualshive

Page: 43 / 100

background image

36

Chapter 6: Configuring the Wireless-G Broadband Router
The Setup Tab - Basic Setup

Wireless-G Broadband Router

Router IP

This presents both the Router’s IP Address and Subnet Mask as seen by your network.

Network Address Server Settings (DHCP)

The settings allow you to configure the Router’s Dynamic Host Configuration Protocol (DHCP) server function. The
Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to
each computer on your network. If you choose to enable the Router’s DHCP server option, you must configure all
of your network PCs to connect to a DHCP server (the Router), and make sure there is no other DHCP server on
your network.

DHCP Server

. DHCP is enabled by factory default. If you already have a DHCP server on your network, or you

don’t want a DHCP server, then click the

Disable

radio button (no other DHCP features will be available).

Starting IP Address

. Enter a value for the DHCP server to start with when issuing IP addresses. Because the

Router’s default IP address is 192.168.1.1, the Starting IP Address must be 192.168.1.2 or greater, but smaller
than 192.168.1.253. The default Starting IP Address is

192.168.1.100

.

Maximum Number of DHCP Users

. Enter the maximum number of PCs that you want the DHCP server to assign

IP addresses to. This number cannot be greater than 253. The default is 50.

Client Lease Time

. The Client Lease Time is the amount of time a network user will be allowed connection to the

Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased”
this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address.
The default is 0 minutes, which means one day.

Static DNS

(1-3). The Domain Name System (DNS) is how the Internet translates domain or website names into

Internet addresses or URLs. Your ISP will provide you with at least one DNS Server IP Address. If you wish to use
another, type that IP Address in one of these fields. You can type up to three DNS Server IP Addresses here. The
Router will use these for quicker access to functioning DNS servers.

WINS

. The Windows Internet Naming Service (WINS) manages each PC’s interaction with the Internet. If you use

a WINS server, enter that server’s IP Address here. Otherwise, leave this blank.

Time Setting

Change the time zone in which your network functions from this pull-down menu. (You can even automatically
adjust for daylight savings time.)

Figure 6-11: Time Setting

Figure 6-10: Network Address Server Settings

Figure 6-9: Router IP

«
...
41
42
43
44
45
...
»

Summary of Contents for WRT54G





































































































Reviews:

No comments

Related manuals for WRT54G

Brand: D-Link Pages: 213

Brand: Konig Pages: 73

Magic WiFi mini Ek

Brand: Devolo Pages: 22

Anybus Communicator ABC4021

Brand: HMS Networks Pages: 60

Brand: HELVAR Pages: 2

Brand: Xantech Pages: 4

E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010

Brand: Juniper Pages: 122

Brand: BinTec Pages: 34

Brand: Alfa Network Pages: 11

Brand: RR-Concepts Pages: 12

Brand: DPS Telecom Pages: 80

ENHANCED PSD 239 H2R

Brand: ADTRAN Pages: 2

Brand: RouterBOARD Pages: 4

Brand: Lantech Pages: 23

Brand: Airaya Pages: 28

Brand: Quamtum Pages: 42

Brand: ADF Web Pages: 20

Brand: Westermo Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands