Cisco WRT54G User Manual Download

Page: 32 / 100

Chapter 5: Setting up the Wireless-G Broadband Router
Using the Setup Wizard

Wireless-G Broadband Router

Manually Configuring the Router’s Wireless Settings

1. If you do not have other SecureEasySetup devices, then click the E

nter Wireless Settings Manually

button.

2. The Setup Wizard will ask you to enter the settings for your wireless network.

In the

SSID

field, enter the name of your wireless network. The SSID must be identical for all devices in the

network. The default setting is

linksys

(all lowercase).

Select the operating channel for your wireless network. All of your wireless devices will use this channel to
communicate.

From the

Network Mode

drop-down menu, select the wireless standards running on your network. If you have

both 802.11g and 802.11b devices in your network, keep the default setting,

Mixed Mode

. If you have only

802.11g devices, select

G-Only

. If you have only 802.11b devices, select

B-Only

. If you want to disable your

wireless network, select

Disable

Enter a name for the Router in the

Device Name

field.

Click the

Next

button to continue or the

Back

button to return to the previous screen.

NOTE:

An SSID is the network name shared by all devices in a wireless network. Your network’s

SSID should be unique to your network and identical for all devices within the network.

Figure 5-27: Setup Wizard’s Configure Wireless

Settings Screen

Figure 5-28: Setup Wizard’s Wireless Settings Screen

Summary of Contents for WRT54G





































































































Search results

Summary of Contents for WRT54G

Reviews:

Related manuals for WRT54G

Brands by name

Popular brands

Cisco WRT54G, User Manual

Search results

Summary of Contents for WRT54G

Reviews:

Related manuals for WRT54G

Brands by name

Popular brands