Cisco VG202 Software Configuration Manual Download Page 7 | Manualshive

Page: 7 / 50

background image

C H A P T E R

1-1

Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide

OL-16191-01

1

Understanding Interface Numbering and
Cisco IOS Software Basics

This chapter provides an overview of interface numbering in the Cisco VG202 and Cisco VG204 voice
gateways (VG). It also describes how to use the Cisco IOS software commands.

This chapter presents the following major topics:

•

Identifying the Cisco VG202 and Cisco VG204 Voice Gateways, page 1-1

•

Port Numbering Conventions, page 1-3

•

Understanding Cisco IOS Software Basics, page 1-4

•

Upgrading to a New Cisco IOS Release, page 1-6

•

Where to Go Next, page 1-7

Identifying the Cisco VG202 and Cisco VG204 Voice Gateways

Cisco VG202 and Cisco VG204 voice gateways deliver analog voice gateways for the service provider
as well as commercial and enterprise unified communication markets. Both voice gateways provide
voice connectivity to devices such as analog phones, fax machines and modems.

Cisco VG202 and Cisco VG204 voice gateways provide support for 2-FXS (Cisco VG202) and 4-FXS
(Cisco VG204) ports, each supporting independent telephone numbers giving you two or four separate
lines, and parity with Cisco IOS fax/modem, security, and Session Initiation Protocol (SIP) features.
Both voice gateways are configurable with Cisco Unified Communications Manager (CUCM).

Note

Cisco VG202 and Cisco VG204 voice gateways are fixed voice gateways and do not support interface
cards.

Note

Your Cisco IOS software release may not support all of the features documented in this document. For
the latest feature information and caveats, see the release notes for your platform and software release.

Note

Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS
software image support. To access Cisco Feature Navigator, go to

http://www.cisco.com/go/cfn

. An

account on Cisco.com is not required.

«
...
5
6
7
8
9
...
»

Summary of Contents for VG202



















































Reviews:

No comments

Related manuals for VG202

Brand: Safeline Pages: 76

OfficeConnect 3C855

Brand: 3Com Pages: 4

Brand: RAKwireless Pages: 47

Brand: RAKwireless Pages: 6

Brand: Net2Phone Pages: 23

iO-GridM GFGW-RM02N

Brand: DAUDIN Pages: 28

Brand: ZyXEL Communications Pages: 6

Brand: Bticino Pages: 4

Brand: SystemAir Pages: 16

Brand: Nokia Pages: 5

Brand: Nokia Pages: 25

Brand: Nokia Pages: 56

Brand: Nokia Pages: 109

Brand: Nokia Pages: 129

SureCross Performance GatewayPro Series

Brand: Banner Pages: 8

GSM Gateway Proline Digital

Brand: Elexim Pages: 11

MediaAccess TG589vn

Brand: Technicolor Pages: 106

MediaAccess TG389ac

Brand: Technicolor Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands