Cisco VG202 Software Configuration Manual Download Page 15 | Manualshive

Page: 15 / 50

background image

C H A P T E R

2-1

Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide

OL-16191-01

2

Using the setup Command Facility

This chapter describes how to use the

setup command facility to configure your Cisco voice gateway

(VG). The setup command facility prompts you to enter information needed to start a VG functioning
quickly. The facility steps you through a basic configuration, including LAN interfaces.

This chapter presents the following major topics:

•

Before Powering On Your Cisco Voice Gateway, page 2-1

•

Using the setup Command Facility, page 2-2

•

Configuring Global Parameters, page 2-2

•

Completing the Configuration, page 2-5

If you prefer to configure the VG manually or if you wish to configure a module or interface that is not
included in the setup command facility, proceed to “

Chapter 3, “Configuring with the Command-Line

Interface,”

for step-by-step instructions.

Note

Cisco VG202 and VG204 voice gateways ship with default configuration. During the first boot up, the
Cisco VG202 and VG204 voice gateways will not enter setup mode and will be configured through
auto-configuration.

If you prefer to configure the VG using AutoInstall, see the

Using AutoInstall to Remotely Configure

Cisco Networking Devices

document.

Before Powering On Your Cisco Voice Gateway

Before you power on your Cisco voice gateway and begin to use the setup command facility, follow
these steps:

Step 1

Set up the hardware as described in the hardware installation documents for your Cisco VG.

Step 2

Configure your PC terminal emulation program for 9600 baud, 8 data bits, no parity, and 1 stop bit.

Step 3

Determine which network protocols you are supporting.

Step 4

Determine the following for each network protocol:

•

Addressing plan

«
...
13
14
15
16
17
...
»

Summary of Contents for VG202



















































Reviews:

No comments

Related manuals for VG202

Brand: Duemmegi Pages: 11

Brand: ICP DAS USA Pages: 71

Brand: NetComm Pages: 2

GSM Eco Comfort 300-9050V11

Brand: SiKom Pages: 2

Brand: Matrix Pages: 322

Brand: turck Pages: 11

Internet Security Gateway ZyWALL 100

Brand: ZyXEL Communications Pages: 708

ADSL2+ Ethernet/USB Gateway 660RU-Tx Series

Brand: ZyXEL Communications Pages: 286

Brand: Cell2Tel Pages: 34

Brand: ZyXEL Communications Pages: 477

Brand: Adeunis RF Pages: 20

Millennium IP Series

Brand: EGi Pages: 16

FP S-OTGuard Seires

Brand: FP Pages: 2

Brand: B&B Electronics Pages: 61

ACTSmart 2 1070

Brand: ACT Technology Pages: 24

Brand: i-tec Pages: 14

Brand: RBH Access Technologies Pages: 8

Brand: Avaya Pages: 214

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands