Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
79
Configuring parallel dialing for ADTRAN switch and PRI
When connecting PRI to an ADtRAN switch, you SHouLD disable parallel dialing used in
bonding calls, due to internal ADtRAN capacity problems. otherwise, outgoing calls (especially
higher rates) may take a long time, or even fail. For other PBXs, you should be able to allow
parallel dialing.
Configuring parallel dialing using the web interface
1. open a browser, enter the address of the telePresence endpoint and login with your user
name and password.
2. From the top menu, go to
Configuration > Peripherals
, and on the Peripherals page click the
Manage ISDN Link
button.
3. on the ISDN Link page go to the
ISDN Link Configuration
menu, and go to
ISDN
>
General
Settings
-
4. Set
ParallelDial
to
Off
(or
On
)
Configuring parallel dialing using the command line interface
Connect to the ISDN Link over the network (SSH) or serial port.
See “
Run the command:
xConfiguration ISDN ParallelDial: Off
(or
On
)
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Appendices
