Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
15
Configuration examples
use the search option on the page to find the parameters, or
choose from the list of menus to the left and then navigate to the
parameters in the right pane.
Example with support for BRI Euro type
Set the net type:
H320 > General Settings > Nettype: BRI
Set the BRI switch type. the switch type setting must match the
switch type for the BRI network the ISDN Link is connected to.
ISDN > BRI > Switchtype: euro
enter the BRI numbers according to the assigned numbers for
each interface, replace xxx with your numbers::
ISDN > BRI Interface 1 > DirectoryNumber 1 Number: xxx
ISDN > BRI Interface 1 > DirectoryNumber 2 Number: xxx
ISDN > BRI Interface 2 > DirectoryNumber 1 Number: xxx
ISDN > BRI Interface 2 > DirectoryNumber 2 Number: xxx
ISDN > BRI Interface 3 > DirectoryNumber 1 Number: xxx
ISDN > BRI Interface 3 > DirectoryNumber 2 Number: xxx
ISDN > BRI Interface 4 > DirectoryNumber 1 Number: xxx
ISDN > BRI Interface 4 > DirectoryNumber 2 Number: xxx
enable the BRI interfaces in use:
ISDN > BRI Interface 1 > Mode: on
ISDN > BRI Interface 2 > Mode: on
ISDN > BRI Interface 3 > Mode: on
ISDN > BRI Interface 4 > Mode: on
Check the status after configuration
Go to
Configuration > Peripherals
and check the ISDN status
information to confirm there are no errors before proceeding. If any
errors, or if the power LeD is red, please check your configuration.
Note:
Please refer to xConfiguration ISDN BRI AutoActivation if
connected to equipment enforcing BRI line deactivation when BRI
lines are not in use.
Navigate to H320 > General Settings >
Nettype.
Set the H320 Net type:
• BRI
Click the
Save
button.
Navigate to ISDN > BRI > Switchtype.
Set the ISDN BRI Switch type:
• euro
Click the
Save
button.
Navigate to ISDN > BRI > Interface [1..4].
enter the BRI numbers according to the
assigned numbers for each interface,
replace xxx with your numbers::
• ISDN > BRI Interface [1..4] >
DirectoryNumber [1..2] Number: xxx
enable the BRI interfaces in use:
• ISDN > BRI Interface [1..4] > Mode: on
Click the
Save
buttons.
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Getting started
