Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
7
About ISDN Link
the Cisco telePresence® ISDN Link is a compact appliance
for in-room ISDN and external network connectivity.
the ISDN Link provides direct connectivity for IP-to-ISDN
or IP-to-V.35 networks. It can be used as main connection
or a back up connection. Support for up to four Basic Rate
Interface (BRI) or one Primary Rate Interface (PRI) ISDN ports
and external networks (cable standards V.35, RS530, RS449,
and RS366).
Refer to the
Cisco telePresence ISDN Link Data Sheet
for
information about which endpoints support use of ISDN Link.
Pairing mode
We highly recommend to use
automatic paring mode
.
Automatic pairing mode is supported in software version IL1.1.
the tC software on the endpoint must be tC6.0 or later.
You should use
manual paring mode
only if you have to
use software version IL1.0 or if your endpoint has software
version tC5.x.
Note:
endpoints that are paired to ISDN Link do not support
Far end Camera Control (FeCC).
Changing the password
the ISDN Link is delivered with a default user account with no
password set. this user has full access rights to configuration
of the system.
Note:
We strongly recommend that you set a password to
restrict access to system configuration.
For details see “
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Introduction
