Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
17
Configuring the TelePresence endpoint for ISDN
When paired to ISDN Link, the default call settings for the telePresence endpoint can be configured
for ISDN (H320), or you can set the call protocol and call rate each time you make a call.
Setting the default call protocol to H320
Configuring the default call settings to ISDN (H320):
1. open a web browser on your computer, enter the address (IP address or host name) of the
telePresence endpoint in the address bar, and login.
• Navigate to
Configuration > System configuration > Conference 1 > DefaultCall
and set the
Protocol
to
H320
.
• Click the
Save
button.
Setting the call protocol to H320 by each call
• If using a telePresence touch device, see: “
Making a call using the touch controller
• If using a telePresence Remote Control, see: “
Making a call using the remote control
• If calling from the telePresence endpoint’s web interface, see: “
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Getting started
