Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
20
Making a call using the web
interface of the endpoint
When the ISDN Link is used in automatic pairing mode
you can make a call from the telePresence system’s web
interface.
About ISDN number
• the
ISDN number
is the number to the far end
endpoint (for example an MXP codec).
Replace the number used in the example (8000) with
the number you want to call.
About restricted calls
If using the
ISDN
Restrict
option, choose the
ISDN Restrict
in the Call settings menu.
How to make the call
open a web browser on your computer, enter
the address (IP address or host name) of the
telePresence endpoint in the address bar,
and login.
1. Navigate to
Call Control > Call Control >
Contacts
2. enter the
ISDN number
you want to call.
If the default call protocol is set to ISDN
(H320), proceed to
Step 5
, else proceed
to
Step 3
.
3. Click
Show call settings
and set the
appropriate
call rate
.
If dialing a telephone number choose
Audio Only
from the drop down menu.
4. Set the call protocol to H320.
5. Click the green
Call
button to make the
call.
Connecting the call may take up to 30
seconds.
1
2
3
4
5
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Getting started
