Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
80
The physical interface
Front panel
the LeD indicators are located on the front panel of the unit.
Power
the LeD lights up and remains lit when the ISDN Link is powered up.
When the ISDN Link is not configured correctly this LeD will be red. this will typically happen when you power
up the unit for the first time.
the LeD typically turns red when there is an error with the selected interface (BRI/PRI/Net), or possibly other
system errors that require attendance. Check the ISDN Link status information for errors:
• When used in automatic pairing mode, and after being paired with a telePresence endpoint, the ISDN Link
status information is available from the endpoint’s web interface.
• When used in manual pairing mode, see the user documentation for further details.
BRI/PRI/Net
the BRI/PRI/Net LeD indicates the activated network interface type. the LeD blinks while there is call activity
on the selected interface type.
LAN
the LeD flickers when there is activity on the LAN network.
endpoint
the LeD flickers when there is activity between the ISDN Link and the endpoint (codec / video system).
Power BRI PRI Net LAN endpoint
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Appendices
