Cisco
TelePresence
ISDN
Link
Administrator
Guide
D14954.04 ISDN Link Administrator Guide IL1.1.2, MARCH 2015.
Copyright © 2015 Cisco Systems, Inc. All rights reserved.
5
About this guide
the main objective with this guide is to describe how to
manage the Cisco telePresence ISDN Link in automatic
pairing mode.
When using the ISDN Link in
automatic pairing mode
the
recommended way to manage the ISDN Link is from the
telePresence endpoint’s web interface. the ISDN Link
must be running software version IL1.1 or later, and the
telePresence endpoint must be running tC6.0 or later.
It is also possible to connect to the unit through the serial
port, or over the network through SSH. For details see:
When using the ISDN Link in
manual pairing mode
you will
connect through the serial port or, if you know the IP address,
over the network through SSH. For details see:
User documentation
user documentation for Cisco telePresence ISDN Link can
be found on
http://www.cisco.com/go/isdnlink-docs
Installation guide:
Install and Upgrade | Install and Upgrade Guides
Administrator guide:
Maintain and Operate | Maintain and Operate Guides
API reference guide:
Reference Guides | Command references
Regulatory compliance and safety information:
Install and Upgrade | Install and Upgrade Guides
Software release notes:
Software Downloads, Release and General Information |
Release Notes
Licensing information:
Software Downloads, Release and General Information |
Licensing Information
Technical specification
Information about the technical specification is found on our
web site:
Cisco telePresence ISDN Link Data Sheet
Support and software download
You can download the software for the ISDN Link from our
web site:
http://www.cisco.com/cisco/web/support
1. Click the
Download
tab.
2. type “ISDN Link” in the search field.
3. Click the
Download
button. to download the software,
you must log in with your Cisco.com user ID.
Contents
Introduction
Getting started
Software upgrade
Status information
System settings
Appendices
Introduction
