![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496239.webp)
9-11
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Removing Subscribers and Templates
Use the following commands to remove all subscribers, anonymous groups, or subscriber templates from
the system.
•
no subscriber all
•
no subscriber anonymous-group all
•
clear subscriber anonymous
•
default subscriber template all
Use the following commands to remove a specific subscriber or anonymous group from the system.
•
no subscriber name
•
no subscriber anonymous-group name
These subscriber management commands are LineCard interface commands (with the exception of the
clear subscriber anonymous
command, which is a Privileged Exec command). Make sure that you are
in LineCard Interface command mode, and that the SCE(config if)# prompt appears in the command line.
How to Remove a Specific Subscriber
Options
The following option is available:
•
subscriber-name
— the name of the subscriber to be removed
Step 1
From the SCE(config if)# prompt, type
no subscriber name
subscriber-name
and press
Enter
.
Removes the specified subscriber.
How to Remove All Introduced Subscribers
Step 1
From the SCE(config if)# prompt, type
no subscriber all
and press
Enter
.
Removes all introduced subscribers.