5-39
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configuring and Managing the SNMP Interface
entityPhysical group
The entityPhysical group describes the physical entities managed by a single agent. It contains a single
table, the
entPhysicalTable,
that identifies physical system components.
These are the details of specific objects in the
entPhysicalTable,
as implemented in SCOS:
entityGeneral group
The entityGeneral group contains general information relating to the other object groups. The
entGeneral group contains a single scalar object.
These are the details of specific object in the
entityGeneral
group, as implemented in SCOS:
Information About pcube Enterprise MIB
•
pcube Enterprise MIB, page 5-40
•
Loading the MIB Files, page 5-41
entPhysicalIndex (1)
1 (SCE main board)
entPhysicalDescr (2)
The description corresponding to the Product ID, as it appears in the
product catalog.
entPhysicalVendorType (3)
cevChassisSCE2000 = {cevChassis 511}
(1.3.6.1.4.1.9.12.3.1.3.511)
cevChassisSCE1000 = {cevChassis 512}
(1.3.6.1.4.1.9.12.3.1.3.512)
entPhysicalContainedIn (4)
0 (not contained)
entPhysicalClass (5)
3 (chassis)
entPhysicalParentRelPos (6)
1
entPhysicalName (7)
"Chassis"
entPhysicalHardwareRev (8)
Version ID, as identified in EPROM
entPhysicalFirmwareRev (9)
empty string
entPhysicalSoftwareRev (10)
Software version, as seen in "show version"
entPhysicalSerialNum (11)
Serial number, as identified in EPROM
entPhysicalMfgName (12)
"Cisco Systems, inc."
entPhysicalModelName (13)
Product ID, as identified in EPROM
entPhysicalAlias (14)
empty string
entPhysicalAssetID (15)
empty string
entPhysicalIsFRU (16)
2 (false)
entLastChangeTime
sysUpTime. This reflects the fact that the entries in the Entity-MIB
do not change in the SCE platform after their creation at boot time.