8-14
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 8 Raw Data Formatting: The RDR Formatter and NetFlow Exporting
Configuring the NetFlow Exporting Support
How to Disable the RDR Formatter
Step 1
From the SCE(config)# prompt, type
no service rdr-formatter,
and press
Enter
.
Disables the RDR formatter.
How to Configure the Size of the RDR Formatter History Buffer
Options
The buffer size must be set to 0.
Step 1
From the SCE(config)# prompt, type
rdr-formatter history-size 0,
and press Enter.
Sets the size of the RDR formatter history buffer.
Configuring the NetFlow Exporting Support
•
Options, page 8-14
•
How to Configure a DSCP Value for NetFlow, page 8-15
•
How to Configure the Template Refresh Interval, page 8-15
Options
The following options are relevant specifically to NetFlow exporting support (within the
RDR-Formatter):
•
Assigning a DSCP value to the NetFlow export packets to a specified destination for priority
configuration.
The DSCP value must be between 0 and 63, and be entered in HEX format.
•
Configuring the frequency of exporting the template records (template refresh interval)