5-69
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configuring Domain Name Server (DNS) Settings
How to Remove a Domain Name Server
Step 1
From the SCE(config)# prompt, type
no ip name-server s
erver-address1 [server-address2
[server-address3],
and press
Enter
.
Removes the specified server from the DNS list.
Removing a Domain Name Server: Example
The following example shows how to remove name server (DNS) IP addresses.
SCE(config)#no ip name-server 10.1.1.60 10.1.1.61
How to Remove All Domain Name Servers
Step 1
From the SCE(config)# prompt, type
no ip name-server
and press
Enter
.
Removes all configured DNS servers.
Adding a Host to the Host Table
•
Options, page 5-69
•
Adding Hosts to Removing them from the Host Table: Examples, page 5-69
Options
The following options are available:
•
hostname
— The name of the host.
•
ip-address
— The IP address of the host
Step 1
From the SCE(config)# prompt, type
ip host
hostname ip-address
and press
Enter
.
Adds the specified host to the host table.
Adding Hosts to Removing them from the Host Table: Examples
The following example shows how to add a host to the host table.
SCE(config)#ip host PC85 10.1.1.61
The following example shows how to remove a hostname together with all its IP mappings.
SCE(config)#no ip host PC85