Contents
x
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Monitoring Asymmetric Routing: Example
7-9
Configuring a Forced Failure
7-9
How to Force a Virtual Failure
7-9
How to Exit from a Virtual Failure
7-9
Configuring the Failure Recovery Mode
7-9
Options
7-10
Configure the Failure Recovery Mode: Examples
7-10
Example 1
7-10
Example 2
7-10
Configuring the SCE Platform/SM Connection
7-10
Configuring the Behavior of the SCE Platform in Case of Failure of the SM
7-11
Options
7-11
Configuring the SM-SCE Platform Connection Timeout
7-11
Options
7-11
Enabling and Disabling Link Failure Reflection
7-12
How to Enable Link Failure Reflection
7-12
How to Disable Link Failure Reflection
7-12
Enabling and Disabling Link Failure Reflection on All Ports
7-12
Options
7-13
How to Enable Link Failure Reflection on All Ports
7-13
How to Disable Link Failure Reflection on All Ports
7-13
Configuring Link Failure Reflection in Linecard-Aware Mode (SCE 2000 only)
7-13
How to Enable Linecard-Aware Mode
7-14
How to Disable Linecard-Aware Mode
7-14
C H A P T E R
8
Raw Data Formatting: The RDR Formatter and NetFlow Exporting
8-1
Introduction
8-1
Information About the RDR Formatter and NetFlow Exporting Support
8-1
The RDR Formatter
8-2
NetFlow
8-2
NetFlow Terminology
8-2
NetFlow Exporting Support
8-3
Data Destinations
8-3
Categories
8-4
Priority
8-5
Setting DSCP for NetFlow
8-5
Forwarding Modes
8-5
Protocol
8-6
Transport Type
8-6