Cisco RVS4000 - Gigabit Security Router Administration Manual Download Page 30

Page: 30 / 195

Setting Up and Configuring the Router

Setup

Cisco RVS4000 Security Router with VPN Administrator Guide

Static IP

If your connection uses a permanent IP address to connect to the Internet, then
select

Static IP.

Static IP

Internet IP Address

The router’s IP address, when seen from the WAN, or the

Internet. Your ISP will provide you with the IP Address to specify here.

Subnet Mask

The router’s Subnet Mask, as seen by external users on the Internet

(including your ISP). Your ISP will provide you with the Subnet Mask.

Default Gateway

Your ISP will provide you with the Default Gateway Address,

which is the ISP server’s IP address.

Primary DNS (Required) and Secondary DNS (Optional)

Your ISP will provide

you with at least one DNS (Domain Name System) Server IP Address.

Click

Save

to save your changes, or click

Cancel

to undo your changes.

Summary of Contents for RVS4000 - Gigabit Security Router




































































































































































































Search results

Summary of Contents for RVS4000 - Gigabit Security Router

Reviews:

Related manuals for RVS4000 - Gigabit Security Router

Brands by name

Popular brands

Cisco RVS4000 - Gigabit Security Router, Administration Manual

Search results

Summary of Contents for RVS4000 - Gigabit Security Router

Reviews:

Related manuals for RVS4000 - Gigabit Security Router

Brands by name

Popular brands