Cisco RVS4000 - Gigabit Security Router Administration Manual Download Page 97

Page: 97 / 195

Setting Up and Configuring the Router

Status

Cisco RVS4000 Security Router with VPN Administrator Guide

Status > Local Network

Current IP address System

This shows the current system.

MAC Address

The router MAC Address, as seen on your local, Ethernet network.

IP Address

The Internet IP Address.

Subnet Mask

The Subnet Mask for the IP address above.

IPv6 Address

The IPv6 IP address, if applicable.

DHCP Server

The status of the router’s DHCP server function.

Start IP Address

The first address in the range of IP addresses used by the DHCP

Server.

End IP Address

The final address in the range of IP addresses used by the DHCP

Server.

DHCP Client Table

Click this button to open a window that displays the PCs that

use the router as a DHCP server. The

DHCP Client Table

window displays all

DHCP clients (PCs and other network devices) with this information: Client Names,
Interfaces, IP Addresses, MAC Addresses, and the length of time before their
assigned IP addresses expire.

ARP/RARP Table

Click this button to open a window that displays the PCs that

use the router as an ARP/RARP server. The

ARP/RARP Table

window displays all

ARPs/RARPs (PCs and other network devices) with this information: IP addresses
and MAC addresses.

Summary of Contents for RVS4000 - Gigabit Security Router




































































































































































































Search results

Summary of Contents for RVS4000 - Gigabit Security Router

Reviews:

Related manuals for RVS4000 - Gigabit Security Router

Brands by name

Popular brands

Cisco RVS4000 - Gigabit Security Router, Administration Manual

Search results

Summary of Contents for RVS4000 - Gigabit Security Router

Reviews:

Related manuals for RVS4000 - Gigabit Security Router

Brands by name

Popular brands