Setting Up and Configuring the Router
Firewall
Cisco RVS4000 Security Router with VPN Administrator Guide
50
5
Source Interface
Select the source interface,
WAN
,
LAN
, or
ANY
, from the drop-
down menu.
Source IP
To apply the rule to one source IP address, select
Single
from the drop-
down menu, then enter the address in the field. To apply the rule to all source IP
addresses, select
ANY
from the drop-down menu. To apply the rule to a range of
IP addresses, select
Range
and enter the starting and ending IP addresses. To
apply the rule to a subnet, select
Net
and enter the IP address and subnet mask.
Destination IP
To apply the rule to one destination IP address, select
Single
from
the drop-down menu, then enter the address in the field. To apply the rule to all
destination IP addresses, select
ANY
from the drop-down menu. To apply the rule
to a range of IP addresses, select
Range
and enter the starting and ending IP
addresses. To apply the rule to a subnet, select
Net
and enter the IP address and
subnet mask.
Days
To make the rule apply on a daily basis, select
Everyday
. To make the rule
apply on specific days of the week only, select the desired days.
Time
To make the rule apply for an entire day, select
24 Hours
. To make the rule
apply only during a specific period of the day, enter the starting time in the
From
field and the ending time in the
To
field.
Click
Save
to save your changes, or click
Cancel
to undo your changes. Click
Return
to return to the IP-Based ACL window.
