Cisco ONS 15327, User Documentation

Page: 26 / 559

Figures
xxiv
Cisco ONS 15327 User Documentation
June 2002
Figure 6-9 Example #1: A VT1.5 circuit in a BLSR
6-16
Figure 6-10 Example #2: Two VT1.5 circuits in a BLSR
6-16
Figure 6-11 Example #3: VT1.5 circuit in a UPSR or 1+1 protection scheme
6-17
Figure 6-12 Example #4: Two VT1.5 circuits in UPSR or 1+1 protection scheme
6-17
Figure 6-13 A VT1.5 tunnel
6-18
Figure 6-14 A six-node ring with two VT1.5 tunnels
6-19
Figure 6-15 A DCC tunnel
6-21
Figure 6-16 Selecting DCC tunnel end points
6-22
Figure 7-1 Provisioning line parameters on the DS1-14 card
7-5
Figure 7-2 Provisioning thresholds for the OC48 IR 1310 card
7-12
Figure 7-3 IPPM provisioned for STS 1 on an OC-12 card
7-16
Figure 7-4 Example of external alarms and controls in a virtual wire configuration
7-17
Figure 7-5 The External Alarms subtab showing the XTC-28-3 card
7-18
Figure 7-6 The External Controls subtab showing the XTC-14 card
7-19
Figure 7-7 Example of the external alarm input and output process
7-20
Figure 8-1 Viewing performance-monitoring information
8-2
Figure 8-2 Time interval buttons on the card view Performance tab
8-4
Figure 8-3 Near End and Far End buttons on the card view Performance tab
8-6
Figure 8-4 Signal-type menus for an OC48 card
8-7
Figure 8-5 Baseline button for clearing displayed PM counts
8-8
Figure 8-6 Clear button for clearing PM counts
8-9
Figure 8-7 Threshold tab for setting threshold values
8-11
Figure 8-8 STS tab for enabling IPPM
8-12
Figure 8-9 Viewing pointer justification count parameters
8-14
Figure 8-10 Line tab for enabling pointer justification count parameters
8-15
Figure 8-11 Monitored signal types for the XTC DS1 cards
8-16
Figure 8-12 PM read points on the XTC DS1 cards
8-17
Figure 8-13 Monitored signal types for the XTC DS3 cards
8-22
Figure 8-14 PM read points on the XTC DS3 cards
8-22
Figure 8-15 PM read points on the OC-3 card
8-24
Figure 8-16 Monitored signal types for the OC-12 card
8-29
Figure 8-17 PM read points on the OC-12 card
8-29
Figure 8-18 Monitored signal types for the OC-48 cards
8-34
Figure 8-19 PM read points on the OC-48 cards
8-34
Figure 9-1 Ethernet transporting aggregate traffic from multiple sources
9-2