Cisco ONS 15327, User Documentation

Page: 312 / 559

9-20
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 9 Ethernet Operation
Ethernet Circuit Configurations
Step 11
Verify that the Bidirectional check box is checked and click Next .
The Circuit Creation (Circuit Source) dialog box appears.
Step 12
From the Node menu, choose the current node as the circuit source.
Step 13
Choose Ethergroup from the Slot menu and click Next .
The Circuit Creation (Circuit Destination) dialog box appears.
Step 14 From the Node menu, choose the current node as the circuit destination.
Step 15
Choose Ethergroup from the Slot menu and click Next .
Note
For the Ethernet manual cross-connect, the destination and source should be the same node.
The Circuit Creation (Circuit VLAN Selection) dialog box appears (Figure 9-10 on page 9-9) .
Step 16 Create the VLAN:
a.
Click the New VLAN tab.
The Circuit Creation (Define New VLAN) dialog box opens (Figure 9-9 on page 9-8) .
b.
Assign an easily identifiable name to your VLAN.
c. Assign a VLAN ID.
The VLAN ID should be the next available number (between 2 and 4093) that is not already assigned
to an existing VLAN. Each ONS 15327 network supports a maximum of 509 user-provisionable
VLANs.
d. Click OK .
e.
Highlight the VLAN name and click the arrow >> button to move the VLAN(s) from the Available
VLANs column to the Circuit VLANs column (Figure 9-19) .
Figure 9-19 Selecting VLANs
Step 17 Click Next .
The Circuit Creation (Circuit Routing Preferences) dialog box appears.
Step 18 Confirm that the following information is correct:
•
Circuit name
•
Circuit type
•
Circuit size
• VLANs on this circuit