Cisco ONS 15327, User Documentation

Page: 310 / 559

9-18
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 9 Ethernet Operation
Ethernet Circuit Configurations
Step 16
Create the VLAN:
a. Click the New VLAN tab.
The Circuit Creation (Define New VLAN) dialog box appears (Figure 9-10 on page 9-9) .
b.
Assign an easily identifiable name to your VLAN.
c.
Assign a VLAN ID.
The VLAN ID should be the next available number (between 2 and 4093) that is not already assigned
to an existing VLAN. Each ONS 15327 network supports a maximum of 509 user-provisionable
VLANs.
d.
Click OK .
e. Highlight the VLAN name and click the arrow >> button to move the VLAN(s) from the Available
VLANs column to the Circuit VLANs column (Figure 9-17) .
Figure 9-17 Selecting VLANs
Step 17
Click Next .
The Circuit Creation (Circuit Routing Preferences) dialog box appears.
Step 18
Confirm that the following information is correct:
• Circuit name
•
Circuit type
•
Circuit size
•
VLANs on this circuit
• ONS 15327 nodes included in this circuit
Note
If the circuit information is not correct, click the Back button and repeat the procedure with the
correct information. You can also click Finish, delete the completed circuit and start the
procedure from the beginning.
Step 19 Click Finish .
Step 20
You now need to provision the Ethernet ports and assign ports to VLANs. For port provisioning
instructions, see the
“Provision E10/100-4 Ethernet Ports” procedure on page 9-3 . For information about
assigning ports to VLANs, see the “Provision Ethernet Ports for VLAN Membership” procedure on
page 9-25 .
Step 21
After assigning the ports to the VLANs, repeat Steps 1– 19 at the second ONS 15327 Ethernet manual
cross-connect endpoint.