Cisco ONS 15327, User Documentation

Page: 27 / 559

Figures
xxv
Cisco ONS 15327 User Documentation
June 2002
Figure 9-2 E10/100-4 Ethernet card faceplate
9-2
Figure 9-3 Provisioning E10/100-4 Ethernet ports
9-3
Figure 9-4 A Multicard EtherSwitch configuration
9-4
Figure 9-5 A Single-card EtherSwitch configuration
9-5
Figure 9-6 Multicard EtherSwitch point-to-point circuit
9-6
Figure 9-7 Single-card EtherSwitch point-to-point circuit
9-7
Figure 9-8 Choosing a circuit source
9-8
Figure 9-9 Choosing a VLAN name and ID
9-8
Figure 9-10 Selecting VLANs
9-9
Figure 9-11 Shared packet ring Ethernet circuit
9-10
Figure 9-12 Adding a span
9-12
Figure 9-13 Viewing a span
9-13
Figure 9-14 A Hub and spoke Ethernet circuit
9-14
Figure 9-15 Ethernet manual cross-connects
9-16
Figure 9-16 Creating an Ethernet circuit
9-17
Figure 9-17 Selecting VLANs
9-18
Figure 9-18 Creating an Ethernet circuit
9-19
Figure 9-19 Selecting VLANs
9-20
Figure 9-20 A Q-tag moving through a VLAN
9-23
Figure 9-21 Priority queuing process
9-24
Figure 9-22 Configuring VLAN membership for individual Ethernet ports
9-25
Figure 9-23 STP-blocked path
9-26
Figure 9-24 The Spanning-tree map on the circuit window
9-28
Figure 9-25 MAC addresses recorded in the MAC table
9-31
Figure 9-26 Creating RMON thresholds
9-33
Figure 10-1 Viewing alarms in CTC node view
10-2
Figure 10-2 Selecting the Affected Circuits Option
10-4
Figure 10-3 Highlighted circuit appears
10-4
Figure 10-4 Viewing fault conditions under the Conditions Tab
10-5
Figure 10-5 Viewing all alarms reported for the current session
10-7
Figure 10-6 Network View Alarm Profiles subtab showing the default profiles of listed alarms
10-8
Figure 10-7 Node view Alarm Behavior subtab of an OC-12 alarm profile
10-10
Figure 10-8 Card view Alarm Behavior subtab of an OC-12 alarm profile
10-11
Figure 10-9 The suppress alarms check box
10-12
Figure 11-1 A basic network managed by SNMP
11-2