Cisco ONS 15327, User Documentation

Page: 223 / 559

6-13
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 6 Circuits and Tunnels
Creating a Path Trace
Procedure: Create a J1 Path Trace
To perform this procedure, you must have an STS circuit using the DS-1 ports on the XTC card at the
circuit source and drop ports, or an STS circuit passing through an OC-3 or OC-48 card.
Step 1
Log into the circuit source node and select the Circuits tab.
Step 2
Select the circuit you want to trace, then click Edit .
Step 3
On the Edit Circuit window, click Show Detailed Map at the bottom of the window.
Step 4 On the detailed circuit map, right-click the source port for the circuit and select Edit Path Trace from
the shortcut menu. Figure 6-7 shows an example.
Figure 6-7 Selecting the Edit Path Trace option
Table 6-2 Path Trace Source and Drop Provisioning
Step Port Action Notes
1 Source Edit the path-trace transmit string. If not edited, an empty string is transmitted.
2 Drop Edit the path-trace transmit string. If not edited, an empty string is transmitted.
3 Source Edit the path-trace expected
string.
Only if Path Trace mode is set to Manual, and only
on DS-1 ports.
4 Drop Edit the path-trace expected string Only Path Trace mode is set to Manual, and only
on DS-1 ports.
5 Drop Change Path Trace Mode Automatic or Manual.
6 Source Change Path Trace Mode Automatic or Manual.