8-9
Cisco ONS 15327 User Documentation, R3.3
June 2002
Chapter 8 Performance Monitoring
Using the Performance Monitoring Screen
Procedure: Use the Baseline Button on the Performance Monitoring Screen
Step 1
Open the electrical or optical card of choice. Double-click the card graphic in the main (node) view or
right-click the card and select
Open Card
. (Clicking a card once highlights the card only.)
Step 2
From the card view, click the
Performance
tab.
Step 3
Click the
Baseline
button.
8.1.6 Using the Clear Button
The Clear button located on the far right of the Performance Monitoring screen clears certain PM counts
depending on the option selected.
shows the Clear button on the Performance Monitoring
screen.
Caution
Use caution when pressing the Clear button; improper use can potentially mask problems. This button
is commonly used for testing purposes such as clearing a count that results in the UAS count
incrementing. The UAS state suppresses counting CVs.
Figure 8-6
Clear button for clearing PM counts
Clear button
76202
Summary of Contents for ONS 15327
Page 22: ...Contents xxii Cisco ONS 15327 User Documentation June 2002 I N D E X ...
Page 30: ...Figures xxviii Cisco ONS 15327 User Documentation June 2002 ...
Page 44: ...Procedures xlii Cisco ONS 15454 Installation and Operations Guide R3 2 June 2002 ...
Page 540: ...Glossary GL 16 Cisco ONS 15327 User Documentation R3 3 June 2002 ...
