manualshive.com logo in svg

Cisco Linksys SFE2000, Administration Manual

The Cisco Linksys SFE2000 is a powerful network switch designed for optimal performance. Enhance your network connectivity with ease by downloading the comprehensive user manual and datasheet, available for free on our website. Unlock the full potential of this product by accessing the necessary resources to maximize your networking experience. Download the manuals and datasheets from manualshive.com.

Share
Download
background image

Configuring Device Security

Defining Access Methods

Cisco Small Business SFE/SGE Managed Switches Administration Guide

71

4

-

Version 

6 — Indicates the device supports IPv6.

-

Version 

4 — Indicates the device supports IPv4.

•

IPv6 Address type 

— Displays the IPv6 Type. The possible field values are: 

-

Link Local 

— Indicates the IPv6 address is link-local, that uniquely 

identifies hosts on a single network 

link. A Link-local address has a prefix of 

‘FE80’. The link-local addresses are not routable and can be used for communication on 

the same network only.

 

-

Global 

— Indicates the IPv6 address is a global Unicast IPV6 type which 

is visible and reachable from different subnets.

•

Link Local Interface — Displays the VLANID on which IPv6 is configured.

•

Access Profile Name — Defines the access profile name. The access profile 
name can contain up to 32 characters.

•

Priority — Defines the rule priority. When the packet is matched to a rule, user 
groups are either granted permission or denied device management access. 
The rule number is essential to matching packets to rules, as packets are 
matched on a first-fit basis. The rule priorities are assigned in the Profile Rules 
Page.

•

Management Method — Defines the management method for which the rule is 
defined. Users with this access profile can access the device using the 
management method selected. The possible field values are:

-

All

 — Assigns all management methods to the rule.

-

Telnet

 — Assigns Telnet access to the rule. If selected, users accessing 

the device using Telnet meeting access profile criteria are permitted or 
denied access to the device.

-

SNMP

 — Assigns SNMP access to the rule. If selected, users accessing 

the device using SNMP meeting access profile criteria are permitted or 
denied access to the device.

-

HTTP

 — Assigns HTTP access to the rule. If selected, users accessing 

the device using HTTP meeting access profile criteria are permitted or 
denied access to the device.

-

Secure HTTP (SSL)

 — Assigns HTTPS access to the rule. If selected, 

users accessing the device using HTTPS meeting access profile criteria 
are permitted or denied access to the device.

Summary of Contents for Linksys SFE2000



























































































































































































































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE2000

Safety Vision ROADRECORDER 8000 User Manual preview
ROADRECORDER 8000
Brand: Safety Vision Pages: 40
Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Brand: Paradyne Pages: 112
Cambium Networks PMP 450 Series User Manual preview
PMP 450 Series
Brand: Cambium Networks Pages: 215
TP-Link TD-8817 User Manual preview
TD-8817
Brand: TP-Link Pages: 73
APM AQ-500h Specification Sheet preview
AQ-500h
Brand: APM Pages: 3
Patton electronics 3040/V35 Installation And Operation Manual preview
3040/V35
Brand: Patton electronics Pages: 23
Aztech DSL1000EW(L) Speci?Cations preview
DSL1000EW(L)
Brand: Aztech Pages: 2
Gigabyte GN-WLMA101 User Manual preview
GN-WLMA101
Brand: Gigabyte Pages: 18
X-Micro IEEE 802.11b User Manual preview
IEEE 802.11b
Brand: X-Micro Pages: 49
Airlink101 AR325W Quick Installation Manual preview
AR325W
Brand: Airlink101 Pages: 13
Billion BiPAC 7301VGP User Manual preview
BiPAC 7301VGP
Brand: Billion Pages: 120
Swann NVRx-7300 series Quick Start Manual preview
NVRx-7300 series
Brand: Swann Pages: 9
iNetVu Tachyon CI1300 Quick Start Manual preview
Tachyon CI1300
Brand: iNetVu Pages: 20
Billion BiPAC 5200S RC Series User Manual preview
BiPAC 5200S RC Series
Brand: Billion Pages: 79
C&H Technologies EM405-8 User Manual preview
EM405-8
Brand: C&H Technologies Pages: 50
ActionTec MI424WR MI424WR Upgrade Procedure preview
MI424WR
Brand: ActionTec MI424WR Pages: 3
Erbauer 3663602796282 Original Instructions Manual preview
3663602796282
Brand: Erbauer Pages: 36
Accton Technology Cheetah EtherCard-2320 Quick Installation Manual preview
Cheetah EtherCard-2320
Brand: Accton Technology Pages: 10

Brands by name

Popular brands

Load more brands