Cisco Linksys SFE2000 Administration Manual Download Page 131

Page: 131 / 410

Configuring Device Security

Defining Access Control

Cisco Small Business SFE/SGE Managed Switches Administration Guide

122

For each entry, an interface has a bound ACL.

•

Interface — Indicates the interface to which the associated ACL is bound.

•

ACL Name — Indicates the ACL which is bound to the associated interface.

•

Type — Indicates the ACL type to which is bound to the interface.

STEP 2

Modify the relevant fields.

STEP 3

Click Apply. The settings are defined, and the device is updated.

Modifying ACL Binding

STEP 1

Click Security Suite > Access Control > ACL Binding. The

ACL Binding Page

opens:

STEP 2

Click the

Edit

button. The

Edit ACL Binding Page

opens:

Edit ACL Binding Page

The

Edit ACL Binding Page

contains the following fields:

•

Interface — Indicates the interface to which the ACL is bound.

•

Select MAC Based ACL — Indicates the MAC based ACL which is bound to the
interface.

•

Select IPv4 Based ACL — Indicates the IPv4 based ACL which is bound to the
interface.

•

Select IPv6 Based ACL — Indicates the IPv6 based ACL which is bound to the
interface.

STEP 3

Define the relevant fields.

Summary of Contents for Linksys SFE2000



























































































































































































































































































































































































































Search results

Summary of Contents for Linksys SFE2000

Reviews:

Related manuals for Linksys SFE2000

Brands by name

Popular brands

Cisco Linksys SFE2000, Administration Manual

Search results

Summary of Contents for Linksys SFE2000

Reviews:

Related manuals for Linksys SFE2000

Brands by name

Popular brands