Configuring Device Security
Defining Authentication
Cisco Small Business SFE/SGE Managed Switches Administration Guide
53
4
-
Use Default — Uses the default value for the parameter. If
Use Default
check box
is selected, the global value of 0.0.0.0. is used and interpreted
as a request to use the IP address of the outgoing IP interface.
•
Key String — Defines the authentication and encryption key for
server. The key must match the encryption key used on the server.
The possible values are:
-
User Defined
— Allows the user to define the Key String value.
-
Use Default — Uses the default value for the parameter. If
Use Default
check box
is selected, the global value is used which is an empty string.
•
Authentication Port — Defines the port number through which the
session occurs. The default is port 49.
•
Timeout for Reply — Defines the amount of time that passes before the
connection between the device and the server times out. The field
range is 1-30 seconds.
-
User Defined
— Allows the user to define the
Timeout for Reply
value.
-
Use Default — Uses the default value for the parameter. If
Use Default
check box
is selected, the default is 5 seconds.
•
Single Connection — Enables a single open connection between the device
and the server when selected.
STEP 3
Define the relevant fields.
STEP 4
Click Apply. The server is added, and the device is updated.
Modifying Settings
STEP 1
Click Security Suite > Authentication > . The
Page
opens:
STEP 2
Click the Edit Button. The
Edit Server Page
opens:
