Cisco Linksys SFE2000 Administration Manual Download Page 322

Page: 322 / 410

Configuring SNMP

Configuring SNMP Security

Cisco Small Business SFE/SGE Managed Switches Administration Guide

313

Authentication

— Authenticates SNMP messages, and ensures the

SNMP messages origin is authenticated.

Privacy

— Encrypts SNMP message.

•

Operation — Defines the group access right, which are per view. The possible
field values are:

Default

— Defines the default group access rights.

DefaultSuper

— Defines the default group access rights for

administrator.

STEP 3

Define the relevant fields.

STEP 4

Click Apply. The SNMP Community is defined, and the device is updated.

Modifying SNMP Group Profile Settings

STEP 1

Click System > SNMP > Security > Groups. The

SNMP Groups Page

opens:

STEP 2

Click the Edit Button. The

Edit SNMP Group Profile Page

opens:

Edit SNMP Group Profile Page

The

Edit SNMP Group Profile Page

contains the following fields:

•

Group Name — Displays the user-defined group to which access control rules
are applied. The field range is up to 30 characters.

•

Security Model — Defines the SNMP version attached to the group. The
possible field values are:

SNMPv1

— SNMPv1 is defined for the group.

SNMPv2

— SNMPv2 is defined for the group.

Summary of Contents for Linksys SFE2000



























































































































































































































































































































































































































Search results

Summary of Contents for Linksys SFE2000

Reviews:

Related manuals for Linksys SFE2000

Brands by name

Popular brands

Cisco Linksys SFE2000, Administration Manual

Search results

Summary of Contents for Linksys SFE2000

Reviews:

Related manuals for Linksys SFE2000

Brands by name

Popular brands