Firewall
Firewall and NAT Rule Configuration Examples
Cisco ISA500 Series Integrated Security Appliances Administration Guide
229
6
STEP 4
Or go to the Firewall > NAT > Advanced NAT
page to create an advanced NAT rule
as follows.
STEP 5
Then go to the Firewall > Access Control > ACL Rules
page to create a firewall rule
as follows to allow access:
NOTE
When you create the port forwarding rule, you can check
Create Firewall
Rule
to automatically generate the firewall rule.
Solution 2:
For this use case, you can use the DMZ Wizard to complete the
configuration.
From
WAN1
To
DMZ
Original Source
Address
ANY
Original Destination
Address
PublicIP
Original Services
RDP
Translated Source
Address
ANY
Translated
Destination Address
RDPServer
Translated Services
RDP
From Zone
WAN
To Zone
DMZ
Services
RDP
Source Address
ANY
Destination Address
RDPServer
Match Action
Permit
