Status
Network Status
<edit TITLE>
88
3
VLAN
VLANs to which the physical port is mapped.
PVID
The Port VLAN ID (PVID) to be used to forward or filter
the untagged packets coming into the port. The PVID
of a Trunk port is fixed to the DEFAULT VLAN (1).
WAN
Name
Name of the WAN port.
WAN Type
Network addressing mode used to connect to the
Internet for the WAN port.
Connection Time
Time that the WAN port is connected, in seconds.
Connection Status
Shows if the WAN port obtains an IP address
successfully or not. If yes, the connection status shows
“Connected.”
WAN State
Shows if the WAN port is active or inactive for routing.
If the WAN port is active for routing, the WAN state
shows “Up.” If the WAN port is inactive for routing, the
WAN state shows “Down.”
NOTE:
The state “Down” means that the network
detection fails. Even though the WAN state is down due
to network detection failure, the WAN services (like
SSL VPN and Remote Administration) can still be
connected except the IPsec VPN Access service.
MAC Address
MAC address of the WAN port.
IP Address
IP address of the WAN port that is accessible from the
Internet.
Subnet Mask/Prefix
Length
Subnet mask or IPv6 prefix length for the WAN port.
Gateway
Default gateway for the WAN port.
DNS Server
DNS server for the WAN port.
Physical Port
Physical port that is associated with the WAN port.
Field
Description
