4-15
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
OL-23092-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
IPv6 TFTP Server 1
(SCCP phones
only)
Primary IPv6 Trivial File Transfer Protocol
(TFTP) server used by the phone. If you are not
using DHCPv6 in your network and you want to
change this server, you must use the IPv6 TFTP
Server 1 option.
If you set the IPv6 Alternate TFTP option to Yes
or you disable DHCPv6, you must enter a
non-zero value for the IPv6 TFTP Server 1 option.
If you make changes to the Alternate TFTP or
IPv6 TFTP servers, you must first unlock the CTL
or ITL file on the phone.
When the phone looks for its TFTP server, it gives
precedence to manually assigned TFTP servers,
regardless of the protocol. If your configuration
includes both IPv6 and IPv4 TFTP servers, the
phone prioritizes the order that it looks for its
TFTP server by giving priority to manually
assigned IPv6 TFTP servers and IPv4 TFTP
servers. The phone looks for its TFTP server in the
following order:
1.
Manually assigned IPv6 TFTP servers
2.
Manually assigned IPv4 TFTP servers
3.
DHCPv6 assigned TFTP servers
4.
DHCP assigned TFTP servers
For information about the CTL or ITL file, refer to
Cisco Unified Communications Manager Security
Guide
. For information about unlocking CTL
files, see
Unlocking the CTL and ITL files,
page 4-39
.
1.
Unlock the CTL or ITL file, if necessary. If the
CTL and ITL files both exist, unlock either
file.
2.
If DHCPv6 is enabled, set the IPv6 Alternate
TFTP option to
Yes
.
3.
Scroll to the IPv6 TFTP Server 1 option, press
the
Edit
softkey, and then enter a new TFTP
server IP address.
4.
Press the
Validate
softkey, and then press the
Save
softkey.
Table 4-4
IPv6 Configuration Menu Options (continued)
Option
Description
To Change