Cisco CP-7970G Page 86 Administration Manual Download

Page: 86 / 266

4-8

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5

OL-23092-01

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Network Configuration Menu

PC Port
Configuration

Speed and duplex of the access port. Valid values:

•

Autonegotiate

•

10 Half—10-BaseT/half duplex

•

10 Full—10-BaseT/full duplex

•

100 Half—100-BaseT/half duplex

•

100 Full—100-BaseT/full duplex

•

1000 Full—1000-BaseT/full duplex

If the phone is connected to a switch, configure the
port on the switch to the same speed/duplex as the
phone, or configure both to auto-negotiate.

If you change the setting of this option, you must
change the SW Port Configuration option to the same
setting.

Unlock network configuration options.

Scroll to the PC Port Configuration option
and then press the

Edit

softkey.

Scroll to the setting that you want and then
press the

Select

softkey.

Press the

Save

softkey.

To configure the setting on multiple phones
simultaneously, enable the Remote Port
Configuration in the Enterprise Phone
Configuration (

System > Enterprise Phone

Configuration

Note

If the ports are configured for Remote
Port Configuration in Unified CM, the
data cannot be changed on the phone.

PC VLAN

Allows the phone to interoperate with 3rd party
switches that do not support a voice VLAN. The
Admin VLAN ID option must be set before you can
change this option.

Unlock network configuration options.

Make sure the Admin VLAN ID option is
set.

Scroll to the

PC VLAN

option, press the

Edit

softkey, and then enter a new PC

VLAN setting.

Press the

Validate

softkey and then press

the

Save

softkey.

VPN

Shows the VPN (virtual private network) Client state:

•

Connected

•

Not Connected

(Supported only for the Cisco Unified IP Phone
7942G, 7945G, 7962G, 7965G, and 7975G.)

Display only—Cannot configure.

Table 4-2

Network Configuration Menu Options (continued)

Option

Description

To Change

Summary of Contents for CP-7970G











































































































































































































































































Search results

Summary of Contents for CP-7970G

Reviews:

Related manuals for CP-7970G

Brands by name

Popular brands

Cisco CP-7970G, Administration Manual

Search results

Summary of Contents for CP-7970G

Reviews:

Related manuals for CP-7970G

Brands by name

Popular brands