8-2
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
OL-23092-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Accessing the Web Page for a Phone
Accessing the Web Page for a Phone
To access the web page for a Cisco Unified IP Phone, perform these steps.
Note
If you cannot access the web page, it may be disabled. See
Disabling and Enabling Web Page Access,
page 8-3
for more information.
Procedure
Step 1
Obtain the IP address of the Cisco Unified IP Phone by using one of these methods:
•
Search for the phone in Cisco Unified Communications Manager by choosing
Device > Phone
.
Phones registered with Cisco Unified Communications Manager display the IP address at the top of
the Phone Configuration window.
•
On the phone, press the
Settings
button, choose
Network Configuration
, and then scroll to the IP
Address option.
Step 2
Open a web browser and enter the following URL, where
IP_address
is the IP address of the
Cisco Unified IP Phone:
http://<
IP_address> or https://<IP_address>
(depending on the protocol supported by the Cisco
Unified IP Phone)
The web page for a Cisco Unified IP Phone includes these hyperlinks:
•
Device Information
—Displays device settings and related information for the phone. For more
information, see
Device Information, page 8-4
.
•
Network Configuration
—Displays network configuration information and information about other
phone settings. For more information, see
Network Configuration, page 8-5
.
•
Network Statistics
—Includes the following hyperlinks, which provide information about network
traffic:
–
Ethernet Information
—Displays information about Ethernet traffic. For more information, see
Network Statistics, page 8-9
.
–
Access
—Displays information about network traffic to and from the PC port on the phone. For
more information, see
Network Statistics, page 8-9
.
–
Network
—Displays information about network traffic to and from the network port on the
phone. For more information, see
Network Statistics, page 8-9
.
•
Device Logs
—Includes the following hyperlinks, which provide information that you can use for
troubleshooting:
–
Console Logs
—Includes hyperlinks to individual log files. For more information, see
Device
Logs, page 8-11
.
–
Core Dumps
—Includes hyperlinks to individual dump files.
–
Status Messages
—Displays up to the 10 most recent status messages that the phone has
generated since it was last powered up. For more information, see
Device Logs, page 8-11
.
–
Debug Display
—Displays messages that might be useful to the Cisco TAC if you require
assistance with troubleshooting. For more information, see
Device Logs, page 8-11
.