Cisco CP-7970G, Administration Manual

Page: 137 / 266

5-13
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
OL-23092-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Intercom Allows users to place and receive intercom calls
using programmable phone buttons. You can
configure intercom line buttons to:
•
Directly dial a specific intercom extension.
•
Initiate an intercom call and then prompt the
user to enter a valid intercom number.
Note If your user logs into the same phone on a
daily basis using their Cisco Extension
Mobility profile, assign the phone button
template that contains intercom
information to their profile, and assign the
phone as the default intercom device for the
intercom line.
For more information, refer to the Cisco
Unified Communications Manager Feature
and Services Guide
, Intercom .
Join/Select Creates a conference by joining together existing
calls that are on a single phone line. For more information, refer to the Cisco
Unified IP Phone Guide , Basic Call Handling
chapter, Making Conference Calls section.
Join Across Lines/Select Allows users to apply the Join feature to calls that
are on multiple phone lines.
For more information, refer to:
•
See Configuring Softkey Templates,
page 5-27 .
•
Refer to Cisco Unified Communications
Manager System Guide , Cisco Unified IP
Phones .
Line select If this feature is disabled (default), then the ringing
line is selected. When enabled, the primary line is
picked up even if a call is ringing on another line.
The User must manually select the other line.
Note This feature can also be enabled or disabled
for Extension Mobility.
For more information, refer to the option
“Always use prime line” in the following
chapters of
Cisco Unified Communications
Manager Administration Guide :
• Device Profile Configuration
•
Common Phone Profile Configuration
• Cisco Unified IP Phone Configuration
Line select for voice
messages When disabled (default), pressing the Messages
button selects the line that has a voice message. If
more than one line has voice mail, then the first
available line is selected. When enabled, the
primary line is always used to retrieve voice
messages.
Note
This feature can also be enabled or disabled
for Extension Mobility.
For more information, refer to the option
Always use prime line for voice message in
the following chapters of
Cisco Unified
Communications Manager Administration
Guide
:
•
Device Profile Configuration
•
Common Phone Profile Configuration
• Cisco Unified IP Phone Configuration
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference