Cisco CP-7970G Administration Manual Download

Page: 88 / 266

4-10

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5

OL-23092-01

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Network Configuration Menu

DHCP Address
Released

Releases the IPv4 IP address assigned by DHCP.

Unlock network configuration options.

Scroll to the DHCP Address Released option
and press the

Yes

softkey to release the IP

address assigned by DHCP, or press the

softkey if you do not want to release this IP
address.

Press the

Save

softkey.

DHCP Server

IP address of the Dynamic Host Configuration
Protocol (DHCP) server from which the phone
obtains its IPv4 address.

Display only—Cannot configure.

Alternate TFTP

Indicates whether the phone is using an alternative
TFTP server.

Unlock network configuration options.

Scroll to the Alternate TFTP option and press
the

Yes

softkey if the phone should use an

alternative TFTP server.

Press the

Save

softkey.

Table 4-3

IPv4 Configuration Menu Options (continued)

Option

Description

To Change

Summary of Contents for CP-7970G











































































































































































































































































Search results

Summary of Contents for CP-7970G

Reviews:

Related manuals for CP-7970G

Brands by name

Popular brands

Cisco CP-7970G, Administration Manual

Search results

Summary of Contents for CP-7970G

Reviews:

Related manuals for CP-7970G

Brands by name

Popular brands