manualshive.com logo in svg

Cisco CP-7970G, Administration Manual

The Cisco CP-7970G is a high-quality IP phone designed for advanced business communication needs. With its comprehensive Administration Manual, users can easily configure and manage various settings. Visit our website to download the user manual for free and unleash the full potential of the Cisco CP-7970G.

Share
Download
background image

 

9-10

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5

OL-23092-01

Chapter 9      Troubleshooting and Maintenance

  General Troubleshooting Tips

General Troubleshooting Tips

Table 9-2

 provides general troubleshooting information for the Cisco Unified IP Phone.

Factory Reset Deleted 802.1X Shared Secret

Phone cannot obtain a DHCP-assigned IP address These errors typically indicate that the phone has 

completed a factory reset (see 

Performing a 

Factory Reset, page 9-15

) while 802.1X was 

enabled. A factory reset deletes the shared secret, 
which is required for 802.1X authentication and 
network access. To resolve this, you have two 
options:

  •

Temporarily disable 802.1X authentication on 
the switch.

  •

Temporarily move the phone to a network 
environment that is not using 802.1X 
authentication.

Once the phone starts up normally in one of these 
conditions, you can access the 802.1X 
configuration menus and re-enter the shared secret 
(see 

802.1X Authentication and Status, 

page 4-42

).

Phone does not register with 
Cisco Unified Communications Manager

Phone status display as “Configuring IP” or 
“Registering”

Cannot access phone menus to verify 802.1X 
status

Table 9-1

Cisco Unified IP Phone Security Troubleshooting (continued)

Problem

Possible Cause

Table 9-2

Cisco Unified IP Phone Troubleshooting 

Summary

Explanation

Daisy-chaining IP phones

Cisco does not support connecting an IP phone to another IP phone 
through the PC port. Each IP phone should directly connect to a 
switch port. If phones are connected together in a line (by using the 
PC port), the phones will not work.

Poor quality when calling mobile 
phones using the G.729 protocol

In Cisco Unified Communications Manager, you can configure the 
network to use the G.729 protocol (the default is G.711). When 
using G.729, calls between an IP phone and a mobile phone will 
have poor voice quality. Use G.729 only when absolutely necessary.

Prolonged broadcast storms 
cause IP phones to reset, or be 
unable to make or answer a call

A prolonged Layer 2 broadcast storm (lasting several minutes) on 
the voice VLAN may cause IP phones to reset, lose an active call, 
or be unable to initiate or answer a call. Phones may not come up 
until a broadcast storm ends.

Summary of Contents for CP-7970G











































































































































































































































































Reviews:

No comments

Related manuals for CP-7970G

Talkaphone VOIP-500 Series Integration Manual preview
VOIP-500 Series
Brand: Talkaphone Pages: 4
Talk-a-Phone VOIP-600 Series Quick Installation Manual preview
VOIP-600 Series
Brand: Talk-a-Phone Pages: 6
Talkaphone VOIP-500 Series Quick Installation Manual preview
VOIP-500 Series
Brand: Talkaphone Pages: 6
TAG Heuer meridiist User Manual preview
meridiist
Brand: TAG Heuer Pages: 49
Talkswitch TS-850i User Manual preview
TS-850i
Brand: Talkswitch Pages: 17
Vingtor AACM-144-V10 Installation/Configuration Manual preview
AACM-144-V10
Brand: Vingtor Pages: 76
Krüger & Matz KM0432 Owner'S Manual preview
KM0432
Brand: Krüger & Matz Pages: 20
Infinix X6817 User Manual preview
X6817
Brand: Infinix Pages: 11
RATH MICROTECH SMARTPHONE III Simplified Programming Instructions preview
SMARTPHONE III
Brand: RATH MICROTECH Pages: 2
Talk To Me Technologies wego A-PLUS Series User Manual preview
wego A-PLUS Series
Brand: Talk To Me Technologies Pages: 28
Matrix SPARSH VP710 User Manual preview
SPARSH VP710
Brand: Matrix Pages: 1046
HTC DROID INCREDIBLE 4G LTE Start Here preview
DROID INCREDIBLE 4G LTE
Brand: HTC Pages: 2
Gplus GP810 User Manual preview
GP810
Brand: Gplus Pages: 68
Salora SM301 User Manual preview
SM301
Brand: Salora Pages: 33
SoftBank 921P First Step Manual preview
921P
Brand: SoftBank Pages: 2
switel M 180 Quick Start Manual preview
M 180
Brand: switel Pages: 4
Samsung SM-N935FD User Manual preview
SM-N935FD
Brand: Samsung Pages: 153
Samsung SM-N935S User Manual preview
SM-N935S
Brand: Samsung Pages: 153

Brands by name

Popular brands

Load more brands