manualshive.com logo in svg

Cisco CP-7970G, Administration Manual

The Cisco CP-7970G is a high-quality IP phone designed for advanced business communication needs. With its comprehensive Administration Manual, users can easily configure and manage various settings. Visit our website to download the user manual for free and unleash the full potential of the Cisco CP-7970G.

Share
Download
background image

 

9-14

Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5

OL-23092-01

Chapter 9      Troubleshooting and Maintenance

  General Troubleshooting Tips for the Cisco Unified IP Phone Expansion Module

General Troubleshooting Tips for the Cisco Unified IP Phone 
Expansion Module

Table 9-3

 provides general troubleshooting information for the Cisco Unified IP Phone Expansion 

Module.

Resetting or Restoring the Cisco Unified IP Phone

There are two methods for resetting or restoring the Cisco Unified IP Phone:

  •

Performing a Basic Reset, page 9-14

  •

Performing a Factory Reset, page 9-15

Performing a Basic Reset

Performing a basic reset of a Cisco Unified IP Phone provides a way to recover if the phone experiences 
an error and provides a way to reset or restore various configuration and security settings.

Table 9-4

 describes the ways to perform a basic reset. You can reset a phone with any of these operations 

any time after the phone has started up. Choose the operation that is appropriate for your situation. 

Table 9-3

Cisco Unified IP Phone Expansion Module Troubleshooting 

Problem

Solution

No display on the Cisco Unified 
IP Phone Expansion Module.

Verify that all of the cable connections are correct.

Verify that you have power to the Cisco Unified IP Phone 
Expansion Module.

Lighted buttons on the first 
Cisco Unified IP Phone 
Expansion Module are all red.

Verify that the Cisco Unified IP Phone Expansion Module is 
configured in Cisco Unified Communications Manager.

Lighted buttons on the second 
Cisco Unified IP Phone 
Expansion Module are all amber.

Verify that the Cisco Unified IP Phone Expansion Module is 
configured in Cisco Unified Communications Manager.

Table 9-4

Basic Reset Methods 

Operation

Performing

Explanation

Restart phone

From the Main screen, press 

Settings

 to display 

the Settings menu, then press **#**.

Note

This factory reset sequence also works 
from any other screen that does not 
accept user input.

Resets any user and network configuration 
changes that you have made but that the phone 
has not written to its flash memory to previously 
saved settings, then restarts the phone.

Summary of Contents for CP-7970G











































































































































































































































































Reviews:

No comments

Related manuals for CP-7970G

Panasonic KX-UT123 Admin Manual preview
KX-UT123
Brand: Panasonic Pages: 5
Panasonic KX-UT123 Administrator'S Manual preview
KX-UT123
Brand: Panasonic Pages: 312
Panasonic Section 700 Technical Manual preview
Section 700
Brand: Panasonic Pages: 311
Olympia NEO Operating Manual preview
NEO
Brand: Olympia Pages: 68
Yealink W52 User Manual preview
W52
Brand: Yealink Pages: 6
Yealink W52 Reconfiguration User Manual preview
W52
Brand: Yealink Pages: 2
Tadiran Telecom SIP-T48G Quick Start Manual preview
SIP-T48G
Brand: Tadiran Telecom Pages: 7
Yealink SIP-T4X Wall Mount Quick Installation Manual preview
SIP-T4X
Brand: Yealink Pages: 4
Yealink SIP-T4X Provisioning Manual preview
SIP-T4X
Brand: Yealink Pages: 148
Yealink SIP-T32G Quick User Manual preview
SIP-T32G
Brand: Yealink Pages: 2
Yealink SIP-T54S User Manual preview
SIP-T54S
Brand: Yealink Pages: 131
Yealink SIP-T48S User Manual preview
SIP-T48S
Brand: Yealink Pages: 159
Yealink T48G Admin Manual preview
T48G
Brand: Yealink Pages: 9
Samsung SGH-T399 Manual Del Usuario preview
SGH-T399
Brand: Samsung Pages: 343
Uniden PCD1080 Owner'S Manual preview
PCD1080
Brand: Uniden Pages: 41
HIKVISION DS-KP8000-WHE1 Quick Installation Manual preview
DS-KP8000-WHE1
Brand: HIKVISION Pages: 2
Linksys SPA901 User Manual preview
SPA901
Brand: Linksys Pages: 5
TCL 20 R 5G Service Manual preview
20 R 5G
Brand: TCL Pages: 19

Brands by name

Popular brands

Load more brands