Cisco Cisco Access Registrar 4.2 Administrator'S Manual Download Page 132

Page: 132 / 151

D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.

132

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60

Administrator Guide

Power

adapter

To power socket

Option A: To LAN socket (Ethernet)

Option B: To codec 2

Ethernet port

Codec address

Connecting the Cisco

TelePresence Touch 8 controller

The Cisco TelePresence Touch 8 controller is an alternative to

the remote control and on screen menus.

When a Touch controller is connected to the codec, the

remote control cannot be used. You have to disconnect

(unpair) the Touch controller in order to to use the remote

control.

Touch 8 can can be used with a C Series codec running

software version TC4.1 or later.

Connecting the Touch controller

There are two options how to connect the Touch controller to

the codec. In both cases the connection is via the provided

power adapter, as illustrated above.

A. Connecting the Touch controller to the codec via LAN.

To enable this mode of operation make sure that the

NetworkServices > SSH > Mode

setting is turned

The process of associating the Touch controller to the

codec is called paring. The codec is signalling that it is

available for pairing for 30 minutes after it is switched on.

We recommend that the Touch controller and video

system is kept on the same subnet.

B. Connecting the Touch controller directly to the codec’s

second Ethernet port.
To enable this mode of operation use the remote control

and navigate to

Home > Settings > Administrator settings

> Pairing > Direct pairing

and choose

Alternatively, set the

NetworkPort 2 > Mode

setting to

DirectPairing

Restart the codec for the change to take effect.

Touch controller set-up

Once the Touch controller is connected to power, the set-up

procedure begins. Follow the instructions on screen.

If you have connected the unit to the codec via LAN, you

have to choose which codec to pair with. If the codec is

not in the list of available codecs displayed on the Touch

controller, you can choose a codec manually by entering

its IP address.

If the Touch controller needs software upgrade, new software

will be downloaded from the codec and installed on the unit

automatically as part of the set-up procedure. The Touch

controller restarts after the upgrade.

You can verify that the Touch controller is successfully paired

to the codec by checking that the codec address is displayed

in the top banner.

If you want more details on Touch installation, please read the

Cisco TelePresence Touch 8 inch Installation Guide

, which is

available on the Cisco web site.

You will find this setting in the Advanced Configuration on-screen menu (remote control) or in the System Configuration page on the web interface.

Contents

Introduction

Web interface

System settings

Setting passwords

Appendices

Summary of Contents for Cisco Access Registrar 4.2
























































































































































Search results

Summary of Contents for Cisco Access Registrar 4.2

Reviews:

Related manuals for Cisco Access Registrar 4.2

Brands by name

Popular brands

Cisco Cisco Access Registrar 4.2, Administrator'S Manual

Search results

Summary of Contents for Cisco Access Registrar 4.2

Reviews:

Related manuals for Cisco Access Registrar 4.2

Brands by name

Popular brands