D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
115
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Administrator Guide
Video Selfview
Determine if the main video source (self-view) shall be displayed on screen.
This setting is obsoleted by the Video SelfviewDefault Mode setting.
Requires user role:
USER
Value space:
<Off/On>
Off:
Do not display self-view on screen.
On:
Display self-view on screen.
Example:
Video Selfview: On
Video SelfviewPosition
Select where the small self-view PiP (Picture-in-Picture) will appear on screen.
This setting is obsoleted by the Video SelfviewDefault PIPPosition setting.
Requires user role:
ADMIN
Value space:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/
LowerRight>
UpperLeft:
The self-view PiP will appear in the upper left corner of the screen.
UpperCenter:
The self-view PiP will appear in the upper center of the screen.
UpperRight:
The self-view PiP will appear in the upper right corner of the screen.
CenterLeft:
The self-view PiP will appear on the left side of the screen, in center.
CenterRight:
The self-view PiP will appear on the right side of the screen, in center.
LowerLeft:
The self-view PiP will appear in the lower left corner of the screen.
LowerRight:
The self-view PiP will appear in the lower right corner of the screen.
Example:
Video SelfviewPosition: LowerRight
Video SelfviewDefault Mode
Determine if the main video source (self-view) shall be displayed on screen after a call.
The position and size of the self-view window is determined by the Video SelfviewDefault
PIPPosition and the Video SelfviewDefault FullscreenMode settings respectively.
Requires user role:
ADMIN
Value space:
<Off/Current/On>
Off:
self-view is switched off when leaving a call.
Current:
self-view is left as is, i.e. if it was on during the call, it remains on after the call; if it
was off during the call, it remains off after the call.
On:
self-view is switched on when leaving a call.
Example:
Video SelfviewDefault Mode: Current
Video SelfviewDefault FullscreenMode
Determine if the main video source (self-view) shall be shown in full screen or as a small
picture-in-picture (PiP) after a call. The setting only takes effect when self-view is switched on
(see the Video SelfviewDefault Mode setting).
Requires user role:
ADMIN
Value space:
<Off/Current/On>
Off:
self-view will be shown as a PiP.
Current:
The size of the self-view picture will be kept unchanged when leaving a call, i.e. if it
was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the call, it
remains fullscreen after the call.
On:
The self-view picture will be shown in fullscreen.
Example:
Video SelfviewDefault FullscreenMode: Current
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings
