3-65
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-03
Chapter 3 Configuration
Association Table Display Setup
•
Save as Default—Saves your selections as new default settings and returns
you to the Association Table page.
•
Restore Current Defaults—Applies the currently saved default settings to the
Association Table and returns you to the Association Table page.
•
Restore Factory Defaults—Applies the factory default settings to the
Association Table and returns you to the Association Table page.
Settings on the Association Table Filters Page
The Association Table Filters page contains the following settings:
•
Stations to Show
•
Fields to Show
•
Packets To/From Station
•
Bytes To/From Station
•
Primary Sort
•
Secondary Sort
Stations to Show
Select the station types that you want to be displayed in the Association Table. If
you select all station types, all stations of these types appear in the access point’s
Association Table.
Fields to Show
The fields you select here are the column headings for the Association Table.
Fields include:
•
System Name—A device’s system name.
•
State—A device’s operational state. Possible states include:
–
Assoc—The station is associated with an access point.
–
Unauth—The station is unauthenticated with any access point.
–
Auth—The station is authenticated with an access point.
•
IP Address—A device’s IP address.
