4-37
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-03
Chapter 4 Security Setup
Summary of Settings for Authentication Types
Summary of Settings for Authentication Types
Table 4-5
lists the access point settings required to enable each authentication
type and combinations of authentication types.
Table 4-5
Settings for Authentication Types
Authentication Types
Required Settings
LEAP
On the Authenticator Configuration page (shown in
Figure 4-13
):
•
Select an 802.1x protocol draft that matches the protocol draft used by
client devices that associate with the access point.
•
Enter the name or IP address, type, port, shared secret, and timeout
value for your RADIUS server.
•
Select the
EAP
checkbox under the server.
On the AP Radio Data Encryption page for the internal radio or the radio
module (shown in
Figure 4-6
):
•
Select the
Network-EAP
checkbox.
•
Enter a WEP key in key slot 1 and select
128-bit
from the key size
menu.
LEAP and static WEP
under 802.11 Open
•
Enter all the settings for LEAP authentication.
On the AP Radio Data Encryption page for the internal radio or the radio
module (shown in
Figure 4-6
):
•
Select the
Open
checkbox.
