Chapter 6 Managing Firmware and Configurations
Downloading, Uploading, and Resetting the Configuration
6-14
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-03
Uploading from a Local Drive
Follow these steps to upload a configuration file from your hard drive or a mapped
network drive:
Step 1
Follow the link path in the browser interface to reach the System Configuration
Setup page.
Step 2
If you know the exact path and filename of the configuration file, type it in the
Additional System Configuration File entry field.
If you aren’t sure of the exact path to the configuration file, click
Browse...
next
to the entry field. When the File Upload window appears, go to the directory that
contains the configuration file and select the file. Click
Open
.
Step 3
When the filename appears in the Additional System Configuration File entry
field, click
Browser Update Now
.
The configuration file is loaded and applied in the access point.
Uploading from a File Server
Follow these steps to upload a configuration file from a file server:
Step 1
Before you load a configuration file from a server, you need to enter FTP settings
for the server. If you have already entered the FTP settings, skip to
Step 3
.
Follow this link path in the browser interface to reach the FTP Setup page:
a.
On the Summary Status page, click
Setup
b.
On the Setup page, click
FTP
The FTP Setup page appears.
Figure 6-10
shows the FTP Setup page.